An integration for heatpumps handled by heishamon.
Installation should be done using hacs.
1-click:
Just make sure you have an MQTT integration configured. Heishamon mqtt messages should quickly lead to auto-discovery. There is no way to configure one manually.
ℹ This integration supports any heishamon MQTT topic prefix (defaults to panasonic_heat_pump) and multiple heatpumps (experimental).
ℹ️ By default, all sensors related to less common setups (cooling, buffer, solar or pool) are disabled by default. They can easily enabled when looking at the "Aquarea HeatPump Indoor Unit" device under "entities not shown".
If you own Panasonic CZ-TAW1 module and have access to Panasonic smart cloud: use https://github.com/cjaliaga/home-assistant-aquarea or https://github.com/ronhks/panasonic-aquarea-smart-cloud-mqtt.
custom_components so they cannot be installed via hacs at the same time.
Uninstall one before installing the other.
When using compensation curves method, one can add a nice card to represent the values using [ploty](Plotly Graph Card)
type: vertical-stack
cards:
- type: vertical-stack
cards:
- type: horizontal-stack
cards:
- type: entities
entities:
- entity: number.panasonic_heat_pump_main_z1_heat_curve_outside_low_temp
name: "x_min: Outside temp lowest point"
- entity: number.panasonic_heat_pump_main_z1_heat_curve_target_low_temp
name: "y_min: Target temp lowest point"
- type: horizontal-stack
cards:
- type: entities
entities:
- entity: number.panasonic_heat_pump_main_z1_heat_curve_outside_high_temp
name: "x_max: Outside temp highest point"
- entity: number.panasonic_heat_pump_main_z1_heat_curve_target_high_temp
name: "y_max: Target temp highest point"
- type: custom:plotly-graph
refresh_interval: 10
title: Heat curve
defaults:
entity:
show_value: true
line:
shape: spline
layout:
xaxis:
type: number
autorange: true
entities:
- entity: ''
name: Zone 2
x:
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z2_heat_curve_outside_low_temp'].state
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z2_heat_curve_outside_high_temp'].state
'y':
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z2_heat_curve_target_high_temp'].state
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z2_heat_curve_target_low_temp'].state
- entity: ''
name: Zone 1
x:
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z1_heat_curve_outside_low_temp'].state
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z1_heat_curve_outside_high_temp'].state
'y':
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z1_heat_curve_target_high_temp'].state
- >-
$ex
hass.states['number.panasonic_heat_pump_main_z1_heat_curve_target_low_temp'].state
https://github.com/waermewacht/integration is a great integration to provide in depth details about heatpump behavior, some health checks and allows to analyse heatpump performance. It detects heatpump using heishamon natively.